DDA JE Electrical ME 3 April 2023 Shift 3 Part 4

DDA JE Electrical ME 3 April 2023 Shift 3 Part 4

DDA JE Electrical ME 3 April 2023 Shift 3 Part 4

DDA JE Electrical ME 3 April 2023 Shift 3 Part 4

Q.21____is an example of the third inversion of a double slider-crank chain mechanism.

1. Crank and slotted lever mechanism
2. Whitworth quick-return motion mechanism
3. Rotary internal combustion engine
4. Oldham’s coupling

Correct Option: 4

Q.24 In spark-ignition engines, with combustion.
maximum temperature is attained at
mixture during

1. no dissociation; lean
2 dissociation; stoichiometric
3. no dissociation; stoichiometric
4. dissociation; lean

Correct Option: 3

DDA JE Electrical ME 3 April 2023 Shift 3 Part 4

Q.25 Lathes that do NOT have tailstocks are called

1. chucking machines
2. tracer lathes
3. bench lathes
4. bar machines

Correct Option: 1

Q.27 Which of the following pumps comes under the category of dynamic pumps?

1. Sliding vane
2. Axial flow
3. Gear
4. Screw

Correct Option: 2

DDA JE Electrical ME 3 April 2023 Shift 3 Part 4

Q.28 The type of sand mould in which a synthetic liquid resin is mixed with sand and the mixture hardens at room temperature is known as

1. hot-box
2. no-bake
3. cold-box
4. green-sand

Correct Option: 2

Q.29 Bernoulli’s equation can be obtained by single scalar integral of

1. Euler’s equation
2. the continuity equation
3. the Darcy-Weisbach equation
4. the momentum equation

Correct Option: 1

Q.32 Based on the following two statements on laminar and turbulent flows, select the correct answer.
Statements:
A) In a laminar flow, the fluid particles move along smooth paths in a predictable manner.
B) In a viscous turbulent flow, the motion of an individual fluid particle is not predictable.

1. Both statements A and B are correct.
2. Statement A is incorrect, but statement B is correct.
3. Statement A is correct, but statement B is incorrect.
4. Both statements A and statement B are incorrect.

Correct Option: 1

DDA JE Electrical ME 3 April 2023 Shift 3 Part 4

Q.34 Which of the following methods is an example of an air-cooling system for engines?

1. Pressure cooling system
2. Non-return system
3. Cooling fins
4. Thermosyphon system

Correct Option: 3

Q38. For a casting with gates at its two sides, the misrun may show up at the centre of the casting. This defect is known as

1. cold shut
2. hot tear
3. gas hole
4. porosity

Correct Option:1

DDA JE Electrical ME 3 April 2023 Shift 3 Part 4

Category –EE Online Test

Telegram-Join Us On Telegram