Synchronous Motors PART 5
Category –EE Online Test
Telegram-Join Us On Telegram
Attempt Free Synchronous Motors PART 5 Here. Read The Important Electrical MCQ From Below.
61. The size of a synchronous motor decreases with the increase in
(A) speed
(B) horse power rating
(C) flux density
(D) all of the above.
Get Answer
62. The flux density used in synchronous motor is around
(A) 0.05 to 0.46 wb/m2
(B) 0.5 to 0.6 wb/m2
(C) 5 to 6 wb/m2
(D) 50 to 60 wb/m2.
Get Answer
63. In a synchronous motor if the saturation is neglected, then the short circuit ratio (SCR) will be related to the synchronous reactance (xd) as
(A) SCR
(B) SCR = (xd)2
(C) SCR = 1/ (xd)2
(D) SCR = 1/ (xd).
Get Answer
Synchronous Motors PART 5
64. In synchronous motor out of the following losses, which one will have the highest proportion ?
(A) Stator copper losses
(B) Friction and windage losses
(C) Eddy current losses
(D) Iron losses.
Get Answer
65. Which of the following losses is not dissipated by the stator core surface in a synchronous motor ?
(A) Copper losses in the slot portion of the conductors
(B) Eddy current losses in the conductors
(C) Iron losses in the stator
(D) Windage losses.
Get Answer
66. The speed of a synchronous motor
(A) reduces as load increases
(B) increases as load increases
(C) adjusts itself to new equilibrium speed whenever load changes
(D) always remains constant.
Get Answer
Synchronous Motors PART 5
67. Which of the following devices can be used as a phase advancer ?
(A) 3 phase induction motor squirrel cage type
(B) 3 phase induction motor-slip ring type
(C) Synchronous motor working at leading power factor
(D) Synchronous motor working at lagging power factor.
Get Answer
68. When a synchronous motor is connected to an infinite bus, while operating on leading power factor .
(A) the excitation voltage will be less than the supply voltage
(B) the excitation voltage will be more than the supply voltage
(C) the excitation voltage will be equal to the supply voltage
(D) the excitation voltage will be independent of the supply voltage.
Get Answer
69. In a synchronous motor
(A) total number of rotor slots = total number of stator slots
(B) total number of rotor slots is more than total number of stator slots
(C) total number of rotor slots is less than the total number of stator slots.
Get Answer
Synchronous Motors PART 5
70. In a synchronous motor during hunting if the rotor speed becomes more than the synchronous speed
(A) negative phase sequence currents are generated
(B) harmonics are developed in the armature circuit
(C) damper bars develop induction generator torque
(D) field excitation increases.
Get Answer
71. If a synchronous motor fails to pull into synchronism after applying dc field current, the probable clause may be
(A) high core losses
(B) low field current
(C) high field current
(D) low short circuit ratio.
Get Answer
72. In case of a 3 phase synchronous motor, maximum speed variation is
(A) 10%
(B) 5%
(C) 3%
(D) zero.
Get Answer
73. The synchronous motors are not self-starting because
(A) stator is not used
(B) starting winding is not provided
(C) the direction of instantaneous torque on the rotor reverses after half cycle
(D) there is no slip.
Get Answer
Questions 74 to 75 refer to the Figure.
74. In the figure above, the curves for leading power factors are
(A) A and B
(B) C and D
(C) On left of line XY
(D) On right of line XY
Get Answer
Synchronous Motors PART 5
75. In the curves represent characteristics for 0, 10, 20 and. 30 kW, not necessarily in that order, then curve for 0 kW is expected to be
(A) A
(B)B
(C) C
(D) D.
Get Answer
