SSC JE 2023 Paper II Civil Part 5

SSC JE 2023 Paper II Civil Part 5

SSC JE 2023 Paper II Civil Part 5

SSC JE 2023 Paper II Civil Part 5

Q81. The actual length of a prismatic compression member is found to be 3 m. Calculate its effective length if one of its ends is restrained against both translation and rotation and the other end is restrained against rotation but free to translate.

1. 3.2 m
2. 2.8 m
3. 3.6 m
4. 6 m

Correct Option: 3

Q.82 Calculate the annual depreciation of a property, whose original cost is ₹30,00,000. Consider its scrape value as 23,00,000 after 30 years. Use the straight-line method.

1. ₹87,000
2. ₹82,000
3. ₹90,000
4. 293,000

Correct Option: 3

Q.83 In plane table surveying, Lehmann’s rules are associated with:

1. solution of all type of resection problems
2. method of resection by two-point problem
3. method of resection by three-point problem
4. method of resection after orientation by compass

Correct Option: 3

SSC JE 2023 Paper II Civil Part 5

Q.84 As per IS456: 2000, the deflection, including effects of temperature, creep and shrinkage occurring after erection of partitions and application of finishes of RC structures, should NOT normally exceed

1. span/350 or 40 mm, whichever is less
2 span/350 or 20 mm, whichever is less
3. span/250 or 20 mm, whichever is less
4 span/200 or 40 mm, whichever is less

Correct Option: 2

SSC JE 2023 Paper II Civil Part 5

Q.86 As per IS 800:2007, what is the maximum slenderness ratio for tension members (e.g. tie in roof truss) and subjected to reversal of stresses due to action of the wind or earthquake forces?

1. 280
2. 450
3. 180
4. 350

Correct Option: 4

Q.87 In the design of a two-way slab, the flexural reinforcement required in a shorter span is found to
be 200 mm2/m. Calculate the required spacing if steel bars of diameter 8 mm are to be used.
Ignore the spacing of reinforcement based on other criteria’s and calculate only based on the given information.

1. 194.65 mm
2. 251.32 mm
3. 236.87 mm
4. 267.23 mm

Correct Option: 2

Q88. A residential building fetches a monthly gross rent of ₹12,000. The annual outgoings in the form of taxes and other contingencies is ₹12,000. The cost of land comes to 26,00,000. Estimate the total value of property (in ) on a yearly basis. Assume the rate of interest as 6% per annum.

1. 28,00,440
2. 22,00,380
3. 29,88,000
4. 7,32,550

Correct Option: 1

SSC JE 2023 Paper II Civil Part 5

Q.89 Textural classification of soil is based on:

1. plasticity index
2. grain size and consistency limits
3. grain size only
4. consistency limits only

Correct Option: 3

Q90. Identify the correctly matched pair(s) from the following based on the unit of measurement used for the estimation of different items of work.

1. Stone slab in roof: square metres
2. Cutting of trees: tonnes
3. Lime concrete in foundation: cubic metres
1. Only 2 and 3
2. Only 1 and 2
3. Only 1 and 3
4. 1, 2 and 3

Correct Option: 3

Q.91 Study the following pairs (P. Q, R, S) with respect to GPS receivers used in GPS surveys and select the correct answer based on the matching.
P: GPS receivers: L-band radio processor
Q: Self-contained GPS receivers: Also known as ‘GPS mice’
R: Dual-frequency receivers : Survey grade GPS, position accuracy according to differential correction within sub-centimetre
S: Carrier phase receivers: GPS receivers with 10 to 30 cm position accuracy with differential correction

1. P, Q only
2. P, S only
3. P, R, S only
4. Q, R only

Correct Option: 3

SSC JE 2023 Paper II Civil Part 5

Q92. An overhanging beam CADEBF is shown in the figure below. Calculate the sum of the bending moment values at A and B. Ignore the sign conventions.

1. 12.50 KN-m
2. 13.50 kN-m
3. 10.00 KN-m
4. 16.78 KN-m

Correct Option: 2

Q.93 Which of the following constant factors relates stress in the steel linearly with stress in adjoining concrete?

1. Shear modulus
2. Young’s modulus
3. Modular ratio
4. Poisson’s ratio

Correct Option: 3

SSC JE 2023 Paper II Civil Part 5

Q.94 Select the option that is true regarding the following two statements labelled Assertion (A) and Reason (R).
(A): For horizontal curves, the centrifugal ratio increases along the length of the transition curve.
(R): In a horizontal curve, the superelevation is provided at an increasing rate with zero at the start to the maximum value at the end of transition curve.

1. Both A and R are true and R is the correct explanation of A
2. Both A and R are true, but R is not the correct explanation of A
3. A is true, but R is false
4. A is false, but R is true

Correct Option:1

Q.95 Consider the following statements with respect to the maximum thickness of particle boards and identify the correct option.
Statement A: As per IS 3129: 1985, the maximum thickness of low-density particle boards shall be 50 mm.
Statement B: As per IS 3129: 1985, the maximum thickness of insulation particle boards shall be 40 mm.

1. Both the statements are correct.
2. Statement A is correct, but statement B is incorrect.
3. Both the statements are incorrect.
4. Statement B is correct, but statement A is incorrect.

Correct Option: 2

SSC JE 2023 Paper II Civil Part 5

Q.98 Which of the following is a vehicle used in making paint?

1. Zinc white
2. Linseed oil
3. Antimony white
4. Aluminium powder

Correct Option: 2

SSC JE 2023 Paper II Civil Part 5

Q.99 Calculate the combined correction, due to refraction and Earth’s curvature, in levelling (surveying) for a distance of 2500 m.

1. 0.420 m
2. 0.070 m
3. 0.168 m
4. 0.490 m

Correct Option: 1

Q100. Consider the below statements with respect to surveying and identify the correct answer.
Statement A: Latitude of a survey line is defined as its coordinate length measured in the direction perpendicular to an assumed meridian direction.
Statement B: The type of levelling in which levels are taken on each side of a main line at right angles to that line in order to determine a vertical cross-section of the surface of the ground is called Differential levelling.

1. Statement B is correct, and statement A is incorrect.
2. Statement A is correct, and statement B is incorrect.
3. Both statements are incorrect.
4. Both statements are correct.

Correct Option: 3

SSC JE 2023 Paper II Civil Part 5

 

Category –EE Online Test

Telegram-Join Us On Telegram