NTPC Diploma Trainee Syllabus 2024 and Exam Pattern – Get Stage 1 and Stage 2 Syllabus
Knowing the syllabus and the exam pattern is the prerequisite for one of the best preparation for any aggressive examination. NTPC will soon launch the notifications for varied posts as NTPC Diploma Trainee. The candidates must qualify two on-line assessments as a way to be NTPC Diploma Trainee certified. The primary stage will cowl the subjects of General Awareness, General English, Quantitative and Reasoning Aptitude. The second stage will probably be an internet technical check based mostly on the respective disciplines. Candidates must receive the qualifying marks in each the exams as a way to fill the vacant posts.
On this article, we cover the main points of the NTPC Diploma Trainee syllabus 2024 and examination sample. Candidates are urged to make a remark of the main points of the NTPC Diploma Trainee Syllabus 2024 and examination sample for higher understanding.
Download NTPC Diploma Trainee Syllabus 2024 PDF!
Note- The above given NTPC Diploma Trainee Syllabus 2024 PDF is of the earlier yr. We’ll replace the NTPC Diploma Trainee Syllabus PDF 2024 as soon as the authorities will launch the official notification 2024.
| NTPC Diploma Trainee Stage 2 Syllabus as PDF Download | |
| NTPC Diploma Trainee Electrical Syllabus | NTPC Diploma Trainee Mechanical Syllabus |
| NTPC Diploma Trainee Mining Syllabus | NTPC Diploma Trainee Mine Survey Syllabus |
NTPC Diploma Trainee Syllabus 2024- Stage 1 (Expected)
The NTPC Diploma Trainee Syllabus 2024 contains three foremost subjects- Common English, Quantitative Aptitude, and Reasoning. The detailed anticipated 2024 NTPC Diploma Trainee Syllabus 2024 for Stage 1 written examination has been given beneath for all topics:
NTPC Diploma Trainee Syllabus 2024
| NTPC Diploma Trainee Stage 1 Syllabus 2024 (Expected) | |
| Subject | Topics |
| General English |
|
| Quantitative Aptitude |
|
| Reasoning |
|
NTPC Diploma Trainee Syllabus 2024 – Stage 2 (Expected)
The NTPC Diploma Trainee Stage 2 will include an internet technical check within the explicit subject. The anticipated 2024 NTPC Diploma Trainee Syllabus 2024 for Stage 2 written examination has been given beneath for all topics:
Observe- The NTPC Diploma Trainee Syllabus 2024 given beneath is of the earlier yr. We’ll replace the NTPC Diploma Trainee Syllabus 2024 as soon as it is going to be launched by the official authorities.
NTPC Diploma Trainee Syllabus 2024
NTPC Diploma Trainee Syllabus 2024: Electrical Engineering
NTPC Diploma Trainee Syllabus: Electrical Engineering
Electrical Basics
1. Fundamentals
2. Magnetic circuit
3. A.C. Theory
4. Generation of Elect. Power
5. Conversion of Electrical Energy
6. Wiring and Power Billing
7. Measuring Instruments
8. Introduction to renewable power generation
Electrical Engineering Material
1. Conducting materials
2. Semiconducting materials
3. Insulating materials
4. Dielectric materials
5. Magnetic materials
6. Material for special purposes
DC/AC Machine & Transformer
1. Dc Generators
2. Dc motors
3. Single phase transformer
4. Auto transformer
5. Three phase transformer
6. Induction motor
7. Alternator
8. Synchronous Motor
9. Single Phase induction motor
10. AC commutator motors
11. Special Electric Machine
12. Three phase transformers
Analog Circuits/ Electronics
1. P-n junction diode
2. Special semiconductor devices
3. Rectifier circuits & filters
4. Transistors
5. Transistor circuits
6. Transistor amplifiers & oscillators
7. Field effect transistor
8. Operational amplifiers
Electrical Measurements & Measuring Instruments
1. Measuring instruments
2. Analog ammeters and voltmeters
3. Wattmeter and measurement of power
4. Energy meters and measurement of energy
5. Measurement of speed, frequency and power factor
6. Instrument transformer
7. Measurement of resistance
8. Measurement of inductance and capacitance
9. Digital instruments
Control System
1. Signal flow graph
2. Time response of the system
3. Analysis of stability
4. Frequency response of system
5. Nyquiest plot
Digital Electronics
1. Number Systems and Codes
2. Logic Gates
3. Boolean Algebra
4. Combinational Circuits
5. Sequential Circuits
6. Logic Families
7. Counters
8. Registers
9. Digital to analog converters
10. Analog to Digital Converters 1
1. Display Devices
Generation, Transmission & distribution of Electrical Power.
1. Generation of electricity
2. Transmission of electric power
3. Overhead line
4. Performance of short & medium lines
5. EHV transmission
6. Distribution System
7. Underground cable
8. Economic Aspects
9. Types of tariff
10. Substation
Circuit and Network Theory
1. Circuit elements and laws
2. Magnetic circuits
3. Network analysis
4. Network theorems
5. Ac circuit and resonance
6. Coupled circuits
7. Transients
8. Two-port network
9. Filters
Microprocessor
1. Introduction to microprocessor & Microcontroller
2. 8085A microprocessor Architecture
3. Instruction set of Intel 8085A
4. 8085 A programming
5. Memory and I/O Interfacing
6. Peripheral Interface
7. Interfacing DAC & ADC
8. Application of 8085 A
Power Electronics & Drives
1. Thyristor
2. Firing Circuits For Thyristor
3. Phase Controlled Rectifier
4. Inverter
5. Chopper
6. Cycle Converter
7. Power Semiconductor Devices
8. Thyristor Applications
9. A.C & D.C Drives
NTPC Diploma Trainee Syllabus 2024
NTPC Diploma Trainee: Mechanical Engineering
- Mechanics
1. Fundamentals of Engineering Mechanics
2. Equilibrium
3. Friction
4. Centroid & moment of Inertia
5. Simple Machines
6. DynamicsTheory of Machines
1. Simple mechanism
2. Friction
3. Power Transmission
4. Governors and Flywheel
5. Balancing of Machine
6. Vibration of machine partsStrength of Material
1. Simple stress& strain
2. Thin cylinder and spherical shell under internal pressure
3. Two dimensional stress systems
4. Bending moment& shear force
5. Theory of simple bending
6. Combined direct & Bending stresses
7. Torsion MechanicalMeasuring Instruments
1. Introduction to measurement
2. Linear measurement
3. Angular measurement
4. Limits fits and tolerances
5. Transducers
6. Strain measurement
7. Measurement of Pressure
8. Temperature measurementPneumatics & Hydraulics
1. Properties of Fluid
2. Fluid Pressure and its measurements
3. Hydrostatics 4. Fluid Flow
5. Flow through pipe
6. Impact of jets
7. Hydraulic turbines
8. Hydraulic PumpsProduction Design
Engineering Drawing & Design/Design Calculation
Manufacturing Processes (Drilling, Milling, Boring)/ Manufacturing Technology
1. Tool Materials
2. Cutting Tools
3. Lathe Machine
4. Shaper
5. Planning Machine
6. Milling Machine
7. Slotter
8. Grinding
9. Internal Machining operations
10. Surface finish, lappingManufacturing Processes/ Heat & Surface Treatment, Heat & Mass Transfer
Metrology and Measurements/Tolerance Limits, Fits
Thermal Engineering/ Power Plant Engineering
1. Concepts and terminology
2. Energy and Work Transfer
3. First Law of thermodynamics
4. Second Law of Thermodynamics
5. Working substances
6. Ideal gases and real gases
7. Vapor Power Cycles
8. Gas Power cycles
9. Fuels and Combustion
10. Heat Transfer
11. Refrigeration cycles
12. Power Plant Engineering/Introduction
13. Steam Power Plant
14. Nuclear Power Plant
15. Diesel engine power plant
16. Hydel Power Plant
NTPC Diploma Trainee: Mining
- Introduction to Mining
- Explosives, mining practices, and gas detection
- Environmental engineering
- Surface mining
- Mining geology
- Mining hazards coal mining methods and support
- Mine management, legislation, and general safety
- Mine surveying
- Mining machinery
- Mine ventilation
- Mine Sampling, Assaying
- Mineral Dressing Electrical Engineering for Mining
NTPC Diploma Trainee Syllabus 2024
NTPC Diploma Trainee: Mine Survey
- Mining Legislation: The Mines Act; Mines Guidelines; Coal Mines Rules 2017 relevant to Opencast Coal mines, masking survey part. Managed surveys: Triangulation, trilateration and utility of GPS and Whole Station in mine surveying.
- Tachometry: Topography and Tachometry associated survey. Whole Station, GPS, DGPS and Auto Stage: Surveying by Whole station, GPS, DGPS and Auto Stage, errors, adjustment and functions like shut traverse, bench mark institution and shifting.
- EDM: Principle of measurement; sorts; correction and number of instrument.
- Field Astronomy: Astronomical phrases; dedication of true bearing by equal altitude technique; Gyro theodolite; precept and dedication of Gyro north, astronomical triangle; conversion of time syste and exact dedication of azimuth by astronomical strategies.
- National grid and Coordinates system: Map projection Cassini Lambert’s polyconic and universal transfers Mercator; transformation of coordinates, vertical projections; mine fashions.
- Geodesy: Geod, spheroid and ellipsoid, geocentric, geodetic and astronomical coordinates orthometric and dynamic heights.
- Photogrammetry: Introduction; scale of a vertical {photograph}; images versus maps; utility of photogrammetry and distant sensing in mining.
- Principle of errors and adjustment: Causes and classification of errors; inclines of precision; legal guidelines of weight propagation and adjustment of errors; adjustment of triangulation figures.
- Surveying of flat, reasonably and steeply inclined and vertical workings: Management of path and gradient in drift and roadways; traversing alongside steep workings with or with out auxiliary telescope.
- Space and quantity calculation; totally different strategies and their limitations: OB quantity calculation by varied strategies; Coal Inventory Measurement; CVC/Different authorities tips concerning Coal Inventory/OB measurement; MDO Contract provisions on volumetric measurement of OB/Coal; Third social gathering provisions for OB/Coal measurement and periodical reconciliation; Plan Contouring and cross part preparation; Earth work and constructing estimation; Laying out of rail and haul highway curves, gradient of haul roads/ramps; measurement of depth of incline roadways and shafts; dedication of azimuth latitude and longitude.
- Monsoon Preparation Plan: Sump, Drainage, Pump capability, rainwater administration plan. Preparation of Emergency Response Plan.
- Borehole surveying, Coal Sampling and evaluation, dip, strike, outcrop and fault issues: Survey of Borehole places, coal seam/parting identification, marking of fault and outcrop, Third social gathering sampling and evaluation methodology concerning Coal high quality; Physio-mechanical-chemical properties of Coal and Non-Coal strata; Totally different grades of Coal.
- Types of plans for opencast workings, their preparation, care, storage and preservation: Laws regarding mine plans and sections; duties and duties of surveyors. Geological map studying.
- Application of computer in mine surveying: Preparation of mine plan by utilizing Auto Cad, Lis CAD, Minex and different Mine planning associated software program, 3D laser profiling of surfaces and bench/slopes by utilizing Terrestrial laser scanner (TLS).
- Profiling of benches, highwall, dumps: Dump/Highwall slope stability monitoring utilizing totally different devices like Laser Scanner/Whole Station/Slope Stability Radar/ Steady Actual-Time Monitoring.
- Coal Quality
NTPC Diploma Trainee Syllabus 2024
NTPC Diploma Trainee Exam Pattern 2024- Stage I (Expected)
Undergo the NTPC Diploma Trainee Exam Pattern for stage 1 and perceive the marking scheme, section-wise marks weightage, and so forth. The anticipated 2024 NTPC Diploma Trainee Examination Sample of Stage 1 has been given beneath:
| NTPC Diploma Trainee Stage 1 Exam Pattern (As per the 2020 official notification) | |||
| Subjects | Marks | Number of total questions | Duration |
| General English | 30 | 120 | 2 hours |
| Reasoning aptitude | 30 | – | – |
| Quantitative aptitude | 30 | – | – |
Note-
- The mode of the check will probably be on-line.
- The questions will probably be goal kind.
- There will probably be 120 questions and every query will weigh one mark.
- The whole marks will probably be 120 marks.
- For every incorrect reply, 0.25 marks will probably be deducted.
- The paper will probably be for a length of two hours.
- The minimal qualifying marks for the candidates from the Common class is 40% marks, and 30% in case of SC/ ST/ OBC/ PwBD candidates.
- The candidates will probably be shortlisted @ 1:10 for two levels On-line Check (Technical).
- There will probably be no weightage to the web aptitude check within the closing choice.
NTPC Diploma Trainee Syllabus 2024
NTPC Diploma Trainee Exam Pattern 2024- Stage 2 (Expected)
The NTPC Diploma Trainee Stage 2 On-line technical check will probably be carried out for a complete of 120 marks and contains 120 questions. The NTPC Diploma Trainee Examination Sample of Stage 2 has been given beneath:
| NTPC Diploma Trainee Stage 2 Exam Pattern (As per the 2020 official notification) | ||||
| Discipline | Questions | Number of Questions | Exam duration | Maximum Marks |
| Electrical Engineering | Discipline Related | 120 | 2 hours | 120 |
| Mechanical Engineering | ||||
| Control and Instrumentation | ||||
Note-
- The mode of the check will probably be on-line.
- The questions will probably be goal sorts associated to the precise self-discipline.
- There will probably be 120 questions and every query will weigh one mark.
- The whole marks will probably be 120 marks.
- For each right reply, 1 mark will probably be awarded. For every incorrect reply, 0.25 marks will probably be deducted.
- The paper will probably be for a length of two hours.
- The qualifying marks are 40% marks within the case of the Common class and 30% for SC/ST/OBC/PwBD candidates.
- A suggestion of appointment will probably be issued based mostly on benefit.
- No talent check will probably be carried out.
NTPC Diploma Trainee Syllabus 2024
Note- The NTPC Diploma Trainee Examination Sample given above is as per the 2020 official notification. We’ll replace the NTPC Diploma Trainee Examination Sample 2022 as soon as the official notification for 2024 will probably be launched.
Category: Syllabus
