# Hydraulic And Fluid Mechanics MCQ Part 1

## Hydraulic And Fluid Mechanics MCQ Part 1

Category –ME Online Test

Attempt Free Hydraulic And Fluid Mechanics MCQ Part 1 Here. Read The Important Electrical MCQ From Below.

Q1. The horse power transmitted through a pipe is maximum when the ratio of loss of head due to friction and total head supplied is
A. 1/3
B. 1/4
C. 1/2
D. 2/3

Q2. The correct relationship among displacement thickness d, momentum thickness m and energy thickness e is
A. d > m > e
B. d > e > m
C. e > m > d
D. e > d > m

Hydraulic And Fluid Mechanics MCQ Part 1

Q3. For laminar flow in circular pipes, the Darcy’s friction factor f is equal to
A. 16/Re
B. 32/ Re
C. 64/ Re
D. none of the above where R,, is Reynolds number.

Q4. The position of center of pressure on a plane surface immersed vertically in a static mass of fluid is.
A. at the centroid of the submerged area
B. always above the centroid of the area
C. always below the centroid of the area
D. none of the above

Hydraulic And Fluid Mechanics MCQ Part 1

Q5. Two pieces of metal when immersed in a liquid have equal upthrust on them, then
A. Both pieces must have equal weig.hts
B. Both pieces must have equal densities
C. Both pieces must have equal volumes
D. Both are floating to the same depth

Q6. The point in the immersed body through which the resultant pressure of the liquid may be taken to act is known as.
A. center of gravity
B. center of buoyancy
C. center of pressure
D. metacentre

Q7. A wooden cylinder floats vertically in water with half of its length immersed. The density of wood is
A. Equal to that of water
B. Half the density of water
C. Double the density of water
D. The question is incomplete

Hydraulic And Fluid Mechanics MCQ Part 1

Q8. The horizontal component of force on a curved surface is equal to the.
A. product of pressure intensity at its centroid and area
B. force on a vertical projection of the curved surface
C. weight of liquid vertically above the curved surface
D. force on the horizontal projection of the curved surface

Q9. If in a satellite orbiting the earth, a cork is immersed in a jar of water and released, it will
A. Rise
B. Sink
C. Remain where left
D. None of the above

Hydraulic And Fluid Mechanics MCQ Part 1

Q10. Stream lines and path lines always coincide in case of.
C. uniform flow
D. turbulent flow

Q11. As ideal fluid is
A. One which obeys Newton’s law of viscosity
B. One which satisfies continuity equation
C. One which flows through pipes with least friction
D. Frictionless and incompressible

Hydraulic And Fluid Mechanics MCQ Part 1

Q12. Due to each end contraction, the discharge of rectangular sharp crested weir is reduced by.
A. 5%
B. 10%
C. 15%
D. 20%

Q13. The relationship dp/dx = dz/dy is valid for
A. Irrotational flow
B. Non-uniform flow
C. Uniform flow

Q14. Coefficient of contraction for an external cylindrical mouthpiece is.
A. 1.00
B. 0.855
C. 0.7H
D. 0.611

Hydraulic And Fluid Mechanics MCQ Part 1

Q15. The ratio between inertia force and viscous force is called
A. Reynold’s number
B. Froude’s number
C. Weber’s number
D. Euler’s number