Electric Machine Design PART 14
Category –EE Online Test
Telegram-Join Us On Telegram
Attempt Free Electric Machine Design PART 14 Here. Read The Important Electrical MCQ From Below.
196. The materials in order of decreasing eddy current loss will be
(A) iron, wood, aluminium
(B) iron, aluminium, wood
(C) aluminium, iron, wood
(D) wood, aluminium, iron.
Get Answer
197. For a 5 kW DC motor the number of slots per pole should be
(A) 4
(B) 8
(C) 12
(D) 16.
Get Answer
198. In a synchronous generator in order to eliminate the fifth harmonic the chording angle should be
(A) 9°
(B) 18°
(C) 27°
(D) 36°.
Get Answer
Electric Machine Design PART 14
199. Inter poles in DC machines are provided to reduce
(A) sparking
(B) armature reaction
(C) iron loss
(D) efficiency.
Get Answer
200. Skewing in the slots of an induction motor is provided to reduce
(A) iron loss
(B) noise
(C) harmonics
(D) temperature rise.
Get Answer
201. Sometimes a reactor is connected in series with a transformer to
(A) improve regulation
(B) control fault current
(C) improve efficiency
(D) improve power factor.
Get Answer
202. DC motor yoke is generally made of
(A) wood
(B) copper
(C) aluminium
(D) steel.
Get Answer
203. For the same rating, the cost of an induction motor as compared to that of a DC motor is
(A) more
(B) less
(C) same
(D) nearly the same.
Get Answer
Electric Machine Design PART 14
204. In case of electrical machines, the intermittent rating as compared to its continuous rating is
(A) more
(B) less
(C) same.
Get Answer
205. For the use of mush windings in 3φ induction motors, the slot should be
(A) semi-closed
(B) open
(C) closed
(D) either (a) or (b).
Get Answer
206. A hunting sound is produced in a synchronous motor when
(A) load fluctuates
(B) supply frequency varies
(C) both (A) and (B) above
(D) none of the above.
Get Answer
207. The transformer noise is mainly because of
(A) cooling oil
(B) sinusoidal current
(C) magnetic flux
(D) all of the above.
Get Answer
208. Stampings in transformers are provided to reduce
(A) hysteresis loss
(B) eddy current loss
(C) copper loss
(D) all of the above.
Get Answer
Electric Machine Design PART 14
209. Which loss occurs in the yoke of a DC machine ?
(A) iron loss
(B) copper loss
(C) heat loss
(D) no loss.
Get Answer
210. The losses occurring in the rotor of an induction motor are less than those in the stator because of
(A) small diameter of rotor
(B) less rotor frequency
(C) slot skewing
(D) none of the above.
Get Answer
