## Circuits and Circuit Theory Part 9

**Category –EE Online Test**

**Telegram-Join Us On Telegram**

Attempt Free Circuits and Circuit Theory Part 9 Here. Read The Important Electrical MCQ From Below.

1. All definitions of power factor of a series R-L-C circuit are correct except

(A) Ratio of net reactance and impedance

(B) Ratio of kW and kVA

(C) Ratio of J and Z

(D) Ratio of W and VA

Correct Answer

2. Ohm is unit of all of the following except

(A) Inductive reactance

(B) Capacitive reactance

(C) Resistance

(D) Capacitance

Correct Answer

Circuits and Circuit Theory Part 9

3. If two sinusoids of the same frequency but of different amplitudes and phase angles are subtracted, the resultant is

(A) A sinusoid of the same frequency

(B) A sinusoid of half the original frequency

(C) A sinusoid of double the frequency

(D) Not a sinusoid

Correct Answer

4. Form factor for a sine wave is

(A) 1.414

(B) 0.707

(C) 1.11

(D) 0.637

Correct Answer

5. All the rules and laws of D.C. circuit also apply to A.C. circuit containing

(A) Capacitance only

(B) Inductance only

(C) Resistance only

(D) All above

Correct Answer

Circuits and Circuit Theory Part 9

6. In R-L-C series resonant circuit magnitude of resonance frequency can be changed by changing the value of

(A) R only

(B) L only

(C) C only

(D) L or C

Correct Answer

7. In an A.C. circuit power is dissipated in

(A) Resistance only

(B) Inductance only

(C) Capacitance only

(D) None of the above

Correct Answer

Circuits and Circuit Theory Part 9

8. The r.m.s. value of half wave rectified sine wave is 200 V. The r.m.s. value of full wave rectified AC. will be

(A) 282.8 V

(B) 141.4 V

(C) 111 V

(D) 100 V

Correct Answer

9. The voltage of domestic supply is 220 V. This figure represents

(A) Mean value

(B) r.m.s. value

(C) Peak value

(D) Average value

Correct Answer

Circuits and Circuit Theory Part 9

10. The transient currents are associated with the

(A) Changes in the stored energy in the inductors and capacitors

(B) Impedance of the circuit

(C) Applied voltage to the circuit

(D) Resistance of the circuit

Correct Answer